Zyxel P-2612HW-F3

DSL Features

• ADSL compliance/ ITU-T G.992.1/ ITU-T G.992.2 Annex A, B (G.lite)/ ITU-T G.994.1 (G.hs)
• ADSL2 Compliance/ ITU-T G.992.3 (G.dmt.bis)/ ITU-T G.992.4 (G.lite.bis)
• ADSL2+ Compliance/ ITU-T G.992.5

Router Features

• NAT (includes multi-to-multi NAT) / SUA, 4096 NAT Sessions
• Full cone NAT
• NAT Server (Port forwarding)
• NAT ALGs
• PPTP/L2TP/IPSec VPN Pass Through
• PPPoE
• DHCP Client/Server/Relay
• DHCP Options (Option 42, 43, 60, 61 and 125)*
• DNS Proxy
• Dynamic DNS Support
• IGMP Snooping and Proxy
• IGMP Fast Leave
• IP Multicasting, IGMP v1, v2, v3*
• IP Alias
• RIP I/ RIP II Supported
• Support 16 IP Static Route
• IP Policy Routing
• UPnP support
• Adjustable MTU size (Max 1518 byte)

Voice Functionality

• SIP version 2 (RFC 3261)
• Codec: G.711, G.729a/b
• Wideband Voice (G.722)*
• Echo Cancellation: G.168, VAD, Silence Suppression, CNG, Dynamic Jitter Buffer
• DTMF Detection and Generation
• DTMF: In-Band and Out-of-Band (RFC 2833), (SIP INFO)
• Modem and Fax Tone Detection and Pass-through
• T.38 FAX Relay
• DNS SRV

Phone Features

• Message Waiting Indicator (RFC 3842)
• Flexible Dial Plan (RFC3525 section 7.1.14)
• Caller ID
• FAX Relay: Transparent Fax Relay over G.711
• Interactive Voice Response (IVR)
• Call Waiting
• Call Hold
• Early Media
• Flash Hook Timer
• Call Transferring (Blind and Attended Transfer)
• Call Forwarding
• Three Way Conference
• Abbreviated Dialing (Speed Dialing)
• Shuttle Enquiry Call (Second Call)
• Do NOT Disturb (DND)
• Call Block
• Calling LINE Identification Presentation (CLIP)
• Calling LINE Identification Restriction (CLIR)
• Connected Line Identification Presentation (COLP)
• Connected Line Identification Restriction (COLR)
• Conference Call w/ Media Server
• Caller ID Generation/ Detection w/ DTMF & FSK Format
• Internal Call
• Speed Dial (Phone Book)

VLAN/QoS

• Support 802.1Q Port/ Tag based VLAN
• Support 802.1P Priority Bit
• TOS/ DiffServ
• Support Flexible Traffic Classification
• Support 4 Priority Queue
• Freely Assign the Classified Traffic to Queues, VLAN, or PVC
• Per VLAN IPR (IP Routing), (Max 4)
• Per VLAN PPPoE (Max 4)
• Media Bandwidth Management (MBM) for Triple Play

Wireless LAN

• IEEE 802.11g Compliance
• Button/ PIN Mode Wi-Fi Protected Setup (WPS)
• Wi-Fi Protected Access support (WPA, WPA PSK, WPA2 (IEEE 802.11i), WPA2-PSK, WPA EAP)
• 802.11e (WMM)
• WLAN Bridge to LAN
• MAC Address Filter
• Support IEEE 802.1x Multiple SSID (up to 4) Random WPA Key Time Scheduling for Wireless On/Off SSID VLAN-tagging (Guest access)*

Firewall Security

• Firewall with SPI
• Protection of DoS Attacking
• Content Filtering: URL Keyword Blocking
• IP & Generic Packet Filtering
• Real-time Attack Alert and Logs
• SIP ALG

Virtual Private Network (VPN)

• 2 Concurrent VPN Tunnels
• IKE and Manual Key Management
• AH and ESP Protocol
• DES/ 3DES and AES Encryption
• SHA-1 and MD5 Authentication
• Tunnel and Transport Mode Encapsulation
• IPSec NAT Traversal
• NETBIOS Pass-through for IPSec

Network Management

• Web GUI
• Command Line Interpreter (CLI)
• Remote Management for Telnet/FTP/ Web/ SNMP/ ICMP/ DNS.
• Remote Firmware Upgrade via Web/FTP/TFTP
• SNMP v1 & v2c with MIB II
• TR-069/ TR-098/ TR-104
• TR-064
• TR111

Hardware Specifications

• RJ-11 DSL port for ADSL Annex A and RJ-45 DSL port for ADSL Annex B and U-R2.
• 4-port Auto MDI/MDI-X 10/100M Ethernet LAN Ports.
• 1-port auto MDI/MDI-X 10/100M Ethernet WAN port
• Wi-Fi IEEE 802.11b/g
• One External Dipole Antenna, Non-detachable.
• Restore Factory Defaults Button
• 2 FXS POTS interface
• A Hardware Switch for DSL/ Ethernet WAN
• WLAN Button on Top Side for WLAN On/Off and WPS
• Restore Factory Reset Button
• Power Consumption: 18W

Physical Specifications

• Item weight: 460 g (1.02 lb)
• Item dimensions (WxDxH): 218 × 144 × 40 mm (8.58" x 5.67" x 1.57")
• Packing weight: 665 g (1.47 lb)
• Packing dimensions (WxDxH): 277 × 263 × 77 mm (10.35" x 10.9" x 3.03")

Environmental Specifications

Operating Environment

• Temperature: 0℃ to 40℃ (32°F to 104°F)
• Humidity: 20% to 85% RH

Storage Environment

• Temperature: -20℃ to 60℃ (-4°F to 140°F)
• Humidity: 20% to 90% RH

Certification

• CE