Passive PoE Injector, incl. 48 Volt, 0.6 Amp power supply (not suitable for Maxwell 10).
This passive Power-over-Ethernet Injector powers your PoE-enabled devices with a standard Ethernet cable. The unused wires of the network cable are used to transmit the voltage. The power LED reliably indicates whether the injector is in operation.
Attention: The adapter is not 802.3af compliant.
Technical specifications
Type: |
Passive PoE Injector |
DC tension: |
48V |
DC socket: |
Low voltage socket (5.5 / 2.1mm) |
Ethernet: |
2 x RJ-45 (1 x LAN, 1 x PoE) 10/100MBit |
Housing material: |
PVC |
Weight: |
29g |
Working environment temperature: |
0° - 45° C |